Table of Contents
- 4 – 2×3 @ 84″
- 4 – 2×3 @ 17″
- 4 – 2×3 @ 14″
Sides
- 2 – 3/4″ thick plywood reduce 36″ x 17-one/4″
Deal with Frame
- 5 – 1×4 @ 36″
- 8 – 1×4 @ 17-3/4″
Shelves
- 2 – 1×8 @ 87″
- 2 – 1×10 @ 87″
Middle Shelf Supports and Cleats
- 5 – 1×2 @ 14″
- 5 – 1×2 @ 17″
Bottom Trim
- one – 2×3 @ 90″
- 2 – 2×3 @ 18-3/4″
Top rated
Doors
- 2- one/4″ thick plywood reduce 20″ x 30″
- 4- 1×3 @ 30″
- 2- 1×3 @ 15″
- one- 1×3 @ 29 one/4″ from corner to corner reduce at an angle of 28 degrees
How To Build A Sliding Barn Door Entertainment Center: The Course of action
Move one) Build The Frame
The frames are pretty self-explanatory but I have incorporated a concluded image as well as a in-depth diagram. I produced 3 different consoles so that is why you see 6 of these frames.
Move 2) Add The Sides
Attach the 3/4″ plywood by initially applying a bead of wooden glue all-around the edge of the plywood and safe employing 2 one/2″ screws. Repeat with just about every portion.
Move 3) Attach to the wall.
I apologize but I forgot to consider a image of the body put in before facial area body, cabinets and cleats were put in but I have incorporated a diagram underneath to give you the measurements.
I put in tongue and groove motor vehicle-siding for texture which displays via the open up back again side. Another terrific strategy would be to paint a contrasting paint shade or insert a pleasurable wallpaper on the wall behind the console.
Move 4) Add The Deal with Frame
Move 5) Add cleats and cabinets
Move 6) Add top boards.
Don’t attach at this level because it will make it additional hard to paint or stain them.
Move seven) Stain or paint body and top
Frame and doors: Sherwin Williams SW Iron Ore (exact shade that Cassity applied in this article!)
Top rated (Pine): Custom Minwax stain shade combine of 50/fifty Typical Gray/Jacobean
Move 8) Make Doors
You could also make regular shaker cupboard doors next this tutorial in this article.
Rip plywood to 20″ x 30″ panels (or dimension of opening). With nail gun, attach the two 30″ trim boards to the plywood panel.
Double check out your measurement and reduce the remaining trim boards to finish the door panel. Attach with nail gun.
To build the diagonal style exhibited on my leisure middle, your board will be 29 one/4″ long from corner to corner with an angle of 28 degrees. Again, attach with nail gun.
Stain or paint doors (or both!). I painted mine Sherwin Williams Iron Ore to match the body. (This is the exact shade Cassity painted her interior doors and colorwashed her barn door in this article to insert shade though continue to demonstrating the wooden grain.)
Move 9) Hang Doors
I adopted the guidance incorporated with my sliding door components. See our Remodelaholic picks for budget-welcoming sliding door components in this article.
Move ten) Attach top boards to the body
That is it! Not far too bad for an overall sliding barn door leisure middle, right? Now it is time for the pleasurable part…the components.
I selected chunky baskets, old trunks and metallic containers to decorate our gentleman cave opening shelving. They insert more storage though retaining a masculine experience.

I am so pleased with the way my sliding barn door leisure middle turned out. All of the sport programs and cable bins are hidden behind the barn doors when not in use, but the doors simply slide open up to give access when needed. The more storage is fantastic for all of the PS4/XBox online games and our DVDs and I even have a basket for distant controls. Everyday living is good for all of us!
Each individual and every one of you inspire me and I Love to see the work that you’ve established. Experience totally free to share with me on Instagram, Twitter or Fb. And as constantly, be guaranteed to follow Diva Of Diy on Pinterest and indication up for our Totally free Newsletter to acquire the most current projects sent straight to your inbox! – Leanne
And follow alongside with Remodelaholic, far too, on YouTube, Instagram, Fb, and Pinterest.
More from Remodelaholic:
Diy and budget-welcoming sliding barn door components
how to establish a farmhouse console
how to establish a double X console desk
how to simply and inexpensively stain wooden any shade
how to establish a break up Dutch barn door
Initially printed 08.26.2017 // Up-to-date 03.twenty five.2020